apelando a su sabiduria..mi consulta es la siguiente..
para que sirve el boton de la parte posterior de este hartke que dice
HPF...ON/OFF..???
de antemano gracias y saludos a todos..
un tipo en un foro ingles pregunto lo mismo y esto le respondieron de samsontech en un email
"The frequency cut off of the HPF is at around 30Hz, and is designed mainly to protect your woofers from blowing out from lower frequencies. The slope is about 6-8dB/octave depending on the amp. "
y aca pille esto
"4. HPF Off/On switch - When on, the very lowest (subsonic) frequencies output
by your Model 2000 are filtered (removed), providing protection to connected
speakers. As a result, speaker movement (excursion) will be reduced, thus
significantly extending the life of your speakers.
We recommend that you keep the HPF Off/On switch at the “On” position
at all times unless you are specifically using the Model 2000 with speakers
specifically designed for ultra-low frequency reproduction (i.e. subwoofers).
Speaker damage (to Hartke transducers) will not be covered by
warranty if it is determined to have been caused by over-excursion."
gracias estimado me queda super claro para que es ese boton....
gracias amigaso..saludos