2015-07-08,10:17
Por poco uso en mi setup vendo un Empress Effects Buffer+. Está impecable.... cero marcas o rayones. Lo tengo con su caja y manual.
NO PERMUTO
Precio: $90.000
Levemente conversable.
![[Imagen: ZdpPzHf.jpg]](http://i.imgur.com/ZdpPzHf.jpg)
Features
All Analog Signal Path - no digitals in here!
Small Size - The enclosure measures approximately 4.5" by 2.5" by 1.5", which is delightfully small when considering all the features packed into this unit.
Tuner Out - Separate tuner output keeps your tuner out of the audio path.
Complete I/O - All the connections to your pedalboard consolidated in one place. Makes setup and teardown quick and easy.
Switchable Boost - Dial in up to 30dB of clean boost and switch on and off with the soft touch foot switch.
Tuner Mute - Hold the footswitch for a second and mute the amp output for tuning.
Noise Filters - Similar to Dolby's noise filter technology, choose between 2 different noise filters to remove any unwanted noise from your effects chain.
Input Pad - Pad or boost the input by 3dB. Great for matching outputs of different guitars, reducing really hot active pickup signal or boosting the signal to your effects to improve signal to noise ratio.
Input Loading - Load down your pickups a little, a lot or not at all. It's up to you.
______
Specifications
Input Impedance 10k - 1Meg
Output Impedance 510 Ω
Frequency Response (-3dB) 5Hz - 40kHz
Power Input Voltage 9V DC (Negative tip)
Power Input Connector 2.1mm barrel connector (Negative tip)
Power Consumption 86mA
Total Harmonic Distortion 0.02%
Signal to Noise Ratio 105.3dB
Headroom +9.4dBu
Enclosure Material Die Cast Aluminum
Input connectors 1/4" Jack
Output connectors 1/4" Jack
Height (enclosure) 1.25"
Height with controls 2"
Length 4.5"
Width 2.5"
Weight 0.5 lbs
NO PERMUTO
Precio: $90.000
Levemente conversable.
Features
All Analog Signal Path - no digitals in here!
Small Size - The enclosure measures approximately 4.5" by 2.5" by 1.5", which is delightfully small when considering all the features packed into this unit.
Tuner Out - Separate tuner output keeps your tuner out of the audio path.
Complete I/O - All the connections to your pedalboard consolidated in one place. Makes setup and teardown quick and easy.
Switchable Boost - Dial in up to 30dB of clean boost and switch on and off with the soft touch foot switch.
Tuner Mute - Hold the footswitch for a second and mute the amp output for tuning.
Noise Filters - Similar to Dolby's noise filter technology, choose between 2 different noise filters to remove any unwanted noise from your effects chain.
Input Pad - Pad or boost the input by 3dB. Great for matching outputs of different guitars, reducing really hot active pickup signal or boosting the signal to your effects to improve signal to noise ratio.
Input Loading - Load down your pickups a little, a lot or not at all. It's up to you.
______
Specifications
Input Impedance 10k - 1Meg
Output Impedance 510 Ω
Frequency Response (-3dB) 5Hz - 40kHz
Power Input Voltage 9V DC (Negative tip)
Power Input Connector 2.1mm barrel connector (Negative tip)
Power Consumption 86mA
Total Harmonic Distortion 0.02%
Signal to Noise Ratio 105.3dB
Headroom +9.4dBu
Enclosure Material Die Cast Aluminum
Input connectors 1/4" Jack
Output connectors 1/4" Jack
Height (enclosure) 1.25"
Height with controls 2"
Length 4.5"
Width 2.5"
Weight 0.5 lbs