2024-02-01,15:05
Se vende por no uso, aparte que lo reemplazaré por otro bicho. Sonido clasicon, onda Vox AC pero más versátil por la eq. Va de clean a crunchy bien rico.
Incluye tubo Electro Harmonix 12ax7. Funciona a 12volt, 300 mah así que no es para nada complicado echarlo a andar con una fuente multiple con salida dedicada a 12 volt.
Otra gracia es que tiene un modo overdrive para ocuparlo como pedal normal. Yo lo usé un par de tocatas (tiene un par de marcas de uso) y en la casa principalmente para grabar y maquetear. Precio:$160.000.
NO permuto, sólo venta.
Cualquier cosa mande interno al wsp: +56981458979
Especificaciones del fabricante:
Features:
– Small dimensions (Snickers size).
– The full set of regulation knobs (Gain, Treble, Middle, Bass, Volume), despite the compact design.
– The really high anode voltage (+250…300V).
– The implementation of either full tube or hybrid (tube + semiconductors) circuit design with efficient emulation of vacuum triode cascades by semiconductor components.
– Ability to use overloaded channels in preamp mode (connected to the Amp’s Return) or in the drive pedal mode (connected to the amp’s Input).
– The pedal can control other devices or be controlled by other devices. It has special CTRL A and CTRL B connectors.
– X-Lead/X-Clean preamps can be used as separate devices, as well as a group of preamps connected in a serial chain (both via the audio path and the control connectors CTRL A and CTRL B). In the latter case, turning on any preamp in the chain will turn off all other connected preamps, that is, they’ll be switched to TRUE BYPASS mode. Thus, without the use of any external devices, it is possible to implement a multichannel preamp from almost any reasonable number of preamps of the X-Lead/X-Clean line, switched by the “one of” rule.
– In addition, X-Lead / X-Clean preamps, along with other devices, can be used as part of an AMT Bricks pedalboard. Full information about the pedalboard will be presented later.
VIDEO:
FOTOS:
https://imgur.com/a/swa2LEE
Incluye tubo Electro Harmonix 12ax7. Funciona a 12volt, 300 mah así que no es para nada complicado echarlo a andar con una fuente multiple con salida dedicada a 12 volt.
Otra gracia es que tiene un modo overdrive para ocuparlo como pedal normal. Yo lo usé un par de tocatas (tiene un par de marcas de uso) y en la casa principalmente para grabar y maquetear. Precio:$160.000.
NO permuto, sólo venta.
Cualquier cosa mande interno al wsp: +56981458979
Especificaciones del fabricante:
Features:
– Small dimensions (Snickers size).
– The full set of regulation knobs (Gain, Treble, Middle, Bass, Volume), despite the compact design.
– The really high anode voltage (+250…300V).
– The implementation of either full tube or hybrid (tube + semiconductors) circuit design with efficient emulation of vacuum triode cascades by semiconductor components.
– Ability to use overloaded channels in preamp mode (connected to the Amp’s Return) or in the drive pedal mode (connected to the amp’s Input).
– The pedal can control other devices or be controlled by other devices. It has special CTRL A and CTRL B connectors.
– X-Lead/X-Clean preamps can be used as separate devices, as well as a group of preamps connected in a serial chain (both via the audio path and the control connectors CTRL A and CTRL B). In the latter case, turning on any preamp in the chain will turn off all other connected preamps, that is, they’ll be switched to TRUE BYPASS mode. Thus, without the use of any external devices, it is possible to implement a multichannel preamp from almost any reasonable number of preamps of the X-Lead/X-Clean line, switched by the “one of” rule.
– In addition, X-Lead / X-Clean preamps, along with other devices, can be used as part of an AMT Bricks pedalboard. Full information about the pedalboard will be presented later.
VIDEO:
FOTOS:
https://imgur.com/a/swa2LEE